general
No. 2
After checking all the previous points:
Turn the water supply tap on.
Place the plug in the power socket. If the unit is only equipped
with an electrical cord for power supply, the authorised service
company must connect the lead wires to an electrical plug that
corresponds to the local electrical requirements or to a separate
two poles disconnect switch with opening between the contacts
of minimum 3mm, very close to the ice maker to be reached
easily and promptly.
Starting Up
Turn on the main switch switch. This operates through a timer
mechanism and the machine will start after approximately
3 minutes.
No. 3
No. 1
To Next Page
Loading...
