Porsche 912 E - Connecting Rods: Checking and Reconditioning

Engine, Crankshaft, Pistons
CHECKING AND iNSTALLING CONNECTING RODS
Check connecting rod weight.
Connecting rods used in a given engine must not
differ in weight by
more than 6 g.
Note
Connecting rods cannot be reconditioned.
The installed weight classes are available as
spare parts.
The codes on the mating surfaces of connecting
rod and cap must be on the same side when
assembled.
Minor binding, which can occur in the bearing
shells when
the connecting rod bolts are tightened,
can be eliminated by applying light blows to
both sides of
the connecting rod with a hammer.
Side Play
New:
Wear
limit:
0.1 - 0.4 mm
0.7 mm
Connecting rod side play, checking.
Printed in Germany
Checking and Installing
Connecting Rods
13
13- 23