Porsche CDC-4 User Manual

TechnicalInformation
Cayman(987)
2/05 ENU 9160 9
CDC-4CDChanger (INo. 692)
Vehicle Type: CaymanS
ModelYear:
As of 2006
Situation: Installation Instructions
Information: Theabove-mentioned vehiclecomesequipped with CDchangerpreparationconsistingof:
-optical waveguideconnection point (atthe frontpanelinthe luggage compartment)and
-power supplyline(at thefrontpanelinthe middleor rightofthe luggagecompartment behindthe trim
panel). Thismeansthatretrofittingcanbe performed withoutany greatexpense.
Beforeorderingparts,alwayscheck and considerthe existingvehicleequipment! Thecorrectoptical
waveguidemustalsobe orderedforthe "CDC-4CDchanger" set!
Thecorrectoptical waveguidetobe used is:
-vehicle type (left-handdrive [LHD])
-equipment version(e.g. with/without soundsystem, navigationmodule)
-installation version (USA/RoW).
Forve hicles with brakeb oosterlining,theplastic luggage compartmenttrim panel 
997.551.133.00.02Acan also be retrofitted upon request.
Parts Info:

997.044.900.78 CDchanger
Onlyforvehicles withoutBose SurroundSoundSystem (INo. 680):
2005©Porsche Cars North America,Inc.
Tequipment
Nov16, 2005
Page 1of 8

Porsche CDC-4 Specifications

General

Type	CD player
Brand	Porsche
Model	CDC-4
Frequency Response	20Hz - 20kHz
Signal-to-Noise Ratio	>90dB
Total Harmonic Distortion	<0.05%
Channels	Stereo

Summary

CD Changer Preparation and Parts

CD Changer Preparation Overview

Details vehicle preparation for CD changer, including optical waveguide and power supply.

Parts Identification and List

Lists all parts required for the CD changer installation, including optical waveguide components.

CD Changer Installation Procedure

Tools and Preparatory Work

Lists necessary tools and outlines initial preparation steps before installation.

Optical Waveguide Installation

Step-by-step guide for installing the optical waveguide component.

CD Changer Mounting and Securing

Instructions on how to mount and secure the CD changer unit in the vehicle.

Post-Installation and Testing

CD Changer Coding Procedure

Detailed steps for coding the CD changer using the PIWIS Tester.

Function Test and Finalization

How to perform a function test and complete the installation process.