Cayman(987)
9 9160 ENU 2/05
TechnicalInformation
Figure5
2.2 Onlyfor vehicleswithout opticalwaveguide
componentintheluggagecompartment:
Pullprotectivecap
Figure5 -A- off theoptical
waveguide.
Figure6
2.3 Onlyfor vehicleswithout opticalwaveguide
component:
Routeoptical waveguidefrom opticalwaveguide
connectionpoint
Figure6-A- alongthe plenum
panelto theCDchang er installationposition
Figure6-B- and secureat this po sition.
2.4 Onlyfor vehicleswith optical waveguide
component:
Routeoptical waveguidefrom opticalwaveguide
connectionpoint
Figure6-A- alongthe plenum
panelto theCDchang er installationposition
Figure6-B- andtothe amplifier
Figure6 -C-
andsecureat thisposition.
Note
Ifthe connectionpointholder isdamaged during removal,
usea new connectionpoint holder(see scope ofparts).
Thenpush theplug socketinto thenewconnectionpoint
holder.
2.5 Fastenconnectionpointholder tothe frontpaneland connectopticalwaveguide connection
point.
2.6 Onlyfor vehicleswith optical waveguidecomponent:
Securethestandardopticalwaveguide asa permanentfixture. Thisremainsfunctionlessinthe
vehicle.
3 Exposetheelectric wire(powersup ply) betweenthe carpet liningand frontpanel.
Nov16, 2005
Page4 of 8
Tequipment
2005©Porsche Cars Nor th America, Inc.
To Next Page
Loading...