Portalp ISO 3 - Codes Management

45
NAVIBLU2 CONSOLE
En
4.4 Configuration menu
. . . .
?
1
2
3
4
5
6
7
8
9
. . . .
?
User code Enter the new User code
OK OK
. . . .
?
1
2
3
4
5
6
7
8
9
. . . .
?
1
2
3
4
5
6
7
8
9
. . . .
?
Key User code
Enter the former
Key User code
Enter the new Key
User Code
OK OK
* * *
* * *
Codes management
OK
* The user necessarily has to personalize his access code & the user code.
* Display User Code if the entry in the configuration menu is made with the installer code or Key User.
Factory settings :
USER : 0000
KEY USER : 0000
*
Two authorization levels are possible :
 The User code, gives access to change mode.
 The Key User code, gives access to change
mode, code management & restricted setting.
4.4.3 Codes management
#
#
Display if the entry in the configuration menu is made with the installer code or Key User.
44