Portalp ISO 3 - Diagnosis and Maintenance; Fault Display and Actions

48
DIAGNOSIS & MAINTENANCE
09
13
15
0 000 000
AUTO
FAULT SEVERITY ACTION
01
Motor temperature
too high
Repairable
 Allow to cool
04
Intrusion Indicative
05
EEprom Critical  Automatic reset.
08
010101
010101
ROM RAM Problem Critical  Automatic reset.
09
Encoder Critical
 Automatic reset*
*If the problem continues, contact your sales
department
10
Motor Critical
 Automatic reset*
*If the problem continues, contact your sales
department
11
Broken arm Critical  Automatic reset.
12
Obstacle on opening Indicative  Remove the obstacle
13
Obstacle on closing Indicative  Remove the obstacle
15
> 130°
Width too wide Critical  Automatic reset.
16
< 30°
Width too small Critical  Automatic reset.
20
Software error Critical  Automatic reset
26
A
Motor current fault Critical  Automatic reset.
31
Monitored safety 1 Indicative
 A safety continuously detects.
 Contact your sales department
32
Monitored safety 2 Indicative
 A safety continuously detects.
 Contact your sales department
Error is alternatively displayed with the running mode.
The automatic reset can be interrupted if the top button Naviblu is active at the end of six seconds.
Six seconds after major error, the system is resetting automatically.
5.1 Fault display5