5
Introduction
INTRODUCTION
Congratulations on the purchase of your SprayMaxx ATV/UTV Sprayer, which has been
designed for the spraying of herbicides and pesticides. The design of the tank enables
the unit to be mounted on to the cargo rack of an ATV, UTV, pick up or trailer.
!
WARNINGS:
• When mounting to any vehicle ensure that you have read the vehicle Owner’s
Manual and make sure you comply with all the weight restrictions as specified by
the vehicle manufacturer, as overloading can cause injury or death.
• To ensure your own safety and that of your employees, if applicable, you must
comply with all relevant environmental, work place health and safety legislation
and codes of practice.
• Select and wear appropriate PPE in accordance with the label of the product you
intend using and your own safe work practices. PPE must still be worn while
cleaning/decontaminating the SprayMaxx.
• Care should be taken when spraying in windy conditions as spray drift may
contaminate the air and may effect the operator or damage adjacent non-target
vegetation.
• Once the spraying operation has been completed, decontaminate the spray
tank and spray accessories. Dispose of tank risings in compliance with current
environmental, work place health and safety requirements.
!
Ensure that all manufacturers'
instructions are followed
regarding the loading
capacity of the ATV.
The correct use of chemicals
MUST be followed at all
times - refer to official
documentation.
Do not drive
across slopes
Do not exceed manufacturers'
loading specifications
WORK SAFELY
ALWAYS WEAR SAFETY CLOTHING IN CONJUNCTION WITH HAND, EYE, HEAD,
HEARING AND FOOT PROTECTION TO HSE/EN SPECIFICATIONS
Got a technical question? Email us at design@portek.co.uk
To Next Page
Loading...