Porter-Cable 345 User Manual

Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
ESPAÑOL: PÁGINA 21
FRANÇAISE : PAGE 41
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2005 Porter-Cable Corporation
Part No. 901012 - 03-21-05
Double Insulated
SAW BOSS
®
MODEL 345
Circular Saw

Porter-Cable 345 Specifications

General

Brand	Porter-Cable
Model	345
Category	Saw
Language	English

Summary

Safety Guidelines Definitions

California Proposition 65

Explains chemicals known to cause cancer, birth defects, or reproductive harm.

General Safety Rules

Work Area Safety

Keep area clean, well-lit, and away from children/bystanders.

Electrical Safety

Proper plugs, avoid wet conditions, do not abuse cords.

Personal Safety

Stay alert, use safety equipment, avoid accidental starting.

Power Tool Use and Care

Service

Additional Specific Safety Rules

Kickback Safety Instructions

Causes and operator prevention of kickback.

Lower Guard Safety Instructions

Other Safety Instructions

Motor

Extension Cord Selection

Carton Contents

Functional Description

Foreword

Describes the saw's design for specific blade types.

Assembly

Removing the Blade

Installing the Blade

Telescoping Guard

Operation

To Adjust the Depth of Cut for Normal Cutting

How to adjust the saw blade depth for proper cutting.

Adjusting for Bevel Cuts

90° and 45° Bevel Positive Stops

To Adjust 90° Positive Stop

To Adjust 45° Bevel Positive Stop

Line of Cut Indicator

To Assemble the Optional Base Insert

Installing the Sawdust Exhaust Nozzle

Installation and Care of Dust Bag

To Attach the Rip Guide

How to Use the Saw

Right-Hand Operation

Illustrates proper right-hand operation of the saw.

Left-Hand Operation

Illustrates proper left-hand operation of the saw.

Cross-Cutting

Ripping

Bevel Cutting

Pocket Cuts (Plunge Cutting)

Troubleshooting

Maintenance

Keep Tool Clean

How to clean the tool and its parts.

Failure to Start

Troubleshooting steps if the tool does not start.

Lubrication

Information on the tool's lubrication requirements.

Brush Inspection

Guidance on brush inspection and service by authorized centers.

Accessories

Warranty

Porter-Cable Delta Service Centers