Porter-Cable 347k User Manual

Double Insulated
Circular Saw
Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. 900003 - 04-09-02
ESPAÑOL: PÁGINA 17
FRANÇAISE : PAGE 35
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
MODELS
347k and 447k
Copyright © 2002 Porter-Cable Corporation
900003 - 04-09-02.qxd 4/18/02 7:41 AM Page 1

Porter-Cable 347k Specifications

General

Brand	Porter-Cable
Model	347k
Category	Saw
Language	English

Summary

Important Safety Information

Initial Safety Guidelines

Key safety advice for users before starting operations.

General Safety Rules

Health Hazards from Dust Exposure

Information on chemicals in dust and how to reduce exposure.

Work Area & Electrical Safety

Guidelines for work area, electrical precautions, and tool grounding.

Personal Safety & Attire

Advice on staying alert, using common sense, and proper dress.

Tool Operation & Care

Preventing Accidental Starts and Injuries

Tips to avoid accidental starting and ensure safe handling.

Proper Tool Usage and Maintenance

Tool Servicing and Parts

Specific Safety for Circular Saws

Blade, Guard, and Body Positioning

Rules for hand placement, guard operation, and operator positioning.

Workpiece Support & Blade Compatibility

Kickback Prevention Explained

Explanation of kickback and how to avoid it.

Advanced Saw Safety

Preventing Binding and Kickback

Methods to resist kickback and prevent blade binding.

Tool Application Warning

Saw Assembly and Blade Handling

Removing the Blade

Installing the Blade

Saw Adjustments

Telescoping Guard Operation

Safety and maintenance of the telescoping guard.

Adjusting Depth of Cut

Procedure for setting the blade depth for normal cuts.

Bevel and Angle Adjustments

Adjusting for Bevel Cuts

Instructions for setting the saw's base for angled cuts.

Operation and Attachments

Rip Guide Installation and Use

Saw Operation: General

Guidelines for two-handed operation and proper hand support.

Cutting Techniques

Cross-Cutting Technique

Ripping Technique

Advanced Cutting Techniques

Bevel Cutting and Compound Cuts

Pocket Cuts (Plunge Cutting)

Maintenance and Troubleshooting

Keeping the Tool Clean

Troubleshooting: Failure to Start

Lubrication and Brush Service

Service, Accessories, and Warranty

Service and Repairs

Guidance on professional servicing and repairs.