Porter-Cable 617 - Service and Repair

Fig. 13
SERVICE AND REPAIR
All quality tools will eventually require servicing or replacement of parts
due to wear from normal use. All maintenance, including brush inspection
and replacement, should ONLY be performed by either an AUTHORIZED
PORTER-CABLE SERVICE STATION or a PORTER-CABLE SERVICE
CENTER. All repairs made by these agencies are fully guaranteed against
defective material and workmanship. We can not guarantee repairs made
or attempted by anyone other than these agencies.
Should you have any questions about your tool, feel free to write us
at any time. In any communications, please give all information shown
on the nameplate of your tool (model number, type, serial number, etc.).
ACCESSORIES
The testing of this tool has been accomplished with the following
accessories. For safest operation, it is recommended that only these
accessories be used with this product.
WARNING: Since accessories other than those listed have not
been tested with this product, use of such accessories could be
hazardous.
No. 53124
RIP GUIDE
No. 48299
BLADE WRENCH
No. 48321
JACKSHAFT WRENCH
No. 44345
CARRYING CASE
No. 698965
REPLACEMENT BLADE BOLT AND WASHER
No. 48095
SOLID LOCK-UP SCREW AND WASHER
(FOR ABRASIVE BLADES)
No. 48230
LUBRICANT
No. 803518
GREASE CUP
14