To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable 7556 and is the answer not in the manual?
General| Voltage | 120V |
|---|---|
| Speed | 0-850 RPM |
| Power Source | Corded |
| Chuck Size | 1/2 inch |
| Length | 11.5 inches |
Read and understand all warnings and operating instructions before use to reduce risk of injury.
Indicates an imminently hazardous situation resulting in death or serious injury if not avoided.
Indicates a potentially hazardous situation resulting in death or serious injury if not avoided.
Indicates a potentially hazardous situation resulting in minor or moderate injury if not avoided.
Precautions for safe use of electrical power tools, including plugs and cords.
Advice on staying alert, using safety equipment, and avoiding accidental starts.
Rules for safe operation, proper attire, maintenance, and storage.
Table of recommended extension cord sizes based on ampere rating and length.
Step-by-step instructions for securely installing and removing drill bits.
Instructions for starting, stopping, and using the trigger switch.
How to use the reversing switch for forward and reverse rotation.
Procedure to change the drill's speed from low to high RPM.
Guidance on proper grip and handling to prevent shock and ensure control.
