EasyManua.ls Logo

Porter-Cable PCC620 - User Manual

Porter-Cable PCC620
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
20V Max* 1/2 inch (13mm) Hammer Drill/Drill Driver
Marteau perforateur de 13 mm (½ po) et de 20V Max*
Taladro percutor de 13 mm (½ pulgada) de 20V Max*
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PCC620
Instruction manual
Manuel d’instructions
Manual de’instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE
SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.
com/ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre
nouveau produit.
Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto,
visite: www.portercable.com / ServiceAndSupport / ProductRegistration.aspx
*Maximum initial battery pack voltage (measured without a
workload) is 20 volts. Measured under a workload, nominal
voltage is 18.
*La tension initiale maximale du bloc-piles (mesurée sans charge
de travail) est de 20 volts. La tension nominale est de 18.
*El máximo voltaje inicial del paquete de baterías (medido sin
una carga de trabajo) es 20 voltios. la tensión nominal es de 18.
Question and Answer IconNeed help?

Do you have a question about the Porter-Cable PCC620 and is the answer not in the manual?

Porter-Cable PCC620 Specifications

General IconGeneral
BrandPorter-Cable
ModelPCC620
CategoryDrill
LanguageEnglish

Related product manuals