Porter 2045-3 “E” User Manual

FM-916 Rev. H 9/16
Parker Hannifin Corporation
Precision Fluidics Division
Porter Instrument
245 Township Line Road
Hatfield, PA 19440
Office 215-723-4000/Fax 215-723-5106
MOBILE “E” TANK STAND INSTALLATION AND INSTRUCTIONS
Warnings and
Precautions
Important: In addition to
these Mobile “E” Tank
Stand Instructions, read
the Conscious Sedation
Flowmeter User’s Manual /
Instructions , which
includes these flowmeter
topics:
 Warnings and
Precautions
 Delivery Technique
 Safety Checks
 Maintenance and
Troubleshooting.
Examination
Examine shipping carton for signs of
external damage.
Remove contents from carton and inspect
for visible damage or missing parts.
Remove any accessories.
Check that hoses are connected.
If damage is discovered or suspected
and/or parts are missing, notify Porter or
authorized distributor immediately.
Perform initial monthly leak test prior to
use.
PORTER CUSTOMER SERVICE: 215-723-4000
www.porterinstrument.com
WARNING
Verify gas indexing pins locations.
See illustrations in
Attachment of Cylinders

Porter 2045-3 “E” Specifications

General

Brand	Porter
Model	2045-3 “E”
Category	Medical Equipment
Language	English

Summary

Warnings and Precautions

Critical Safety Warnings

Installation and Pipeline Integrity

Emphasizes correct installation and warns against crossed gas lines for patient safety.

Cross+Protection System Use

Explains the system's purpose and prohibits tampering with connectors.

Usage Restrictions and Cautions

Operational Safety Procedures

Details N2O leak prevention, scavenging, and power outage response.

Installation and Gas Line Safety

External Gas Supply Connections

Details proper connection of external gas pipelines and potential hazards of crossed lines.

Patient Observation for Over-Sedation

Stresses patient monitoring to detect and prevent over-sedation due to potential line issues.

Intended Use

Flowmeter for Conscious Sedation

Describes the flowmeter's purpose in delivering N2O/O2 for conscious sedation by trained personnel.

Mobile "E" Tank Stand

Proper Attachment of Gas Cylinders

Cylinder Installation Steps

Guides on loosening handles, undoing straps, preparing cylinders, and placing them on pins.

Securing Cylinders

Details on aligning the swivel, tightening the Tee Handle, and securing with straps.

Cylinder (Tank) Operation / Maintenance

Cylinder Pressure Readings

Good Practices with E-Stand

Connecting to Gas Supply

Monthly Check