Porter 2045-3 “E” - Page 8

8
Maintenance and Service – Recommended Replacement Parts
Part Number
Qty Per
2045-3
2045-SHORT3
Item
Description
Unit
A-3369-000
NA
1
Mounting Stud with Washer
1
A-3372-000
A-4052-000
2
Inner Post Assembly with Mounting Stud
1
A-3399-000
3
Yoke Washers
4
B-1883-001
B-4668-000
4
Tube Assembly Only
1
PA-1185-000
5
Tank Wrench with Chain
1
C-1658-000
6
E-Stand Tank Restraint Kit
1
91505113
7
5 Star Base
1
PA-234-002
8
Caster
5
65958000
9
Ribbed End Cap
5
A-4060-000
10
Tee Bar Handle
4
A-3279K
11
Check Valve Assembly Kit
4
NA
B-4669-000
12
S- Bracket Assembly
1
8003
NA
13
3 Ft Hose, O
2
, Diss / Diss
1
8503
NA
14
3 Ft Hose, N
2
O, Diss / Diss
1
NA
8082
15
2 Ft Hose, O
2
, Diss / Diss Elbow
1
NA
8582
16
2 Ft Hose, N
2
O, Diss / Diss Elbow
1
64900409
17
Gauge O
2
Cylinder Pressure (0-4000 psi)
1
64900408
18
Gauge N
2
O Cylinder Pressure (0-4000 psi)
1
Note: Do not recommend replacing regulators in the field. Return to Porter for servicing.
Troubleshooting the Attachment of Cylinders:
Warning: Tee Handle not tightened
securely may result in cylinder leakage with
possible loud hissing or popping sounds. Close
cylinder valve and follow procedures to correctly
align and tighten Tee Handle.
Aligned Swivel
Misaligned Swivel
See Attachment of Cylinders Section
- New Gaskets P/N: A-3399-000 (Replace all 4
once a year.
- Tee Handle is pulled outwards and aligned.
- Swivel is parallel with E-Block
- Bolt head not evident.
- Maintain aligned swivel position as Tee Handle
is securely tightened.
Bolt Head is Evident