POS-X ION Short Range User Manual

Barcode Scanner
User’s Guide
ION Short Range
POINT OF SALE SIMPLIFIED

POS-X ION Short Range Specifications

General

Brand	POS-X
Model	ION Short Range
Category	Barcode Reader
Language	English

Summary

Chapter 1 System Information

1.1 About this manual

Introduces the user guide and explains its purpose for scanner programming.

1.2 How to set up the parameter -I

Details the process of setting up scanner parameters using start, scan, and end barcodes.

1.3 How to set up the parameter - II

Explains parameter setup using hexadecimal or numeric barcodes and confirmation procedures.

Chapter 2 System Setup

2.1 Interface selection

Explains how to select and configure scanner interfaces like USB and RS-232.

2.1.1 Keyboard emulation parameters setting

Configures keyboard emulation types and device selection for the scanner interface.

2.1.2 RS-232 communication setting

Details the configuration of RS-232 communication parameters, including Baud Rate and Data Bits.

2.2 Scanning mode selection

Configures the different reading modes for the scanner, such as continuous or triggered scanning.

2.3 Beeper tone selection

Allows configuration of beep sounds, duration, and power-on beeper settings.

2.4 String Options (Prefix & Suffix)

Explains how to add prefixes and suffixes to scanned barcode data for output customization.

2.5 Setup Insertion

Describes how to set up insertion of characters or groups into the output data stream.

Chapter 3 BarCode parameters setting

3.1 UPC-A

Configuration options for UPC-A barcode symbology, including read, check digit, and truncation.

3.2 UPC-E

Configuration settings for UPC-E barcode symbology, including expansion and truncation options.

3.3 EAN-13

Settings for EAN-13 barcode symbology, covering read status, check digit, and supplement digits.

3.4 EAN-8

Configuration options for EAN-8 barcode symbology, including read status, check digit, and supplement digits.

3.5 Code39

Settings for Code39 barcode symbology, including check-sum verification and code length parameters.

3.6 Codabar

Configuration options for Codabar barcode symbology, including check-sum and start/end type settings.

3.7 Code93

Settings for Code93 barcode symbology, including check-sum verification and code length.

3.8 Code 128

Configuration options for Code 128 barcode symbology, including check-sum and FNC1 transmission.

3.9 Interleaved 2 of 5

Settings for Interleaved 2 of 5 barcode symbology, including check-sum and code length parameters.

3.10 Industrial 2 of 5

Configuration options for Industrial 2 of 5 barcode symbology, including check-sum and code length.

3.11 Matrix 2 of 5

Settings for Matrix 2 of 5 barcode symbology, including check-sum verification and code length.

3.12 CHINA POSTAL CODE

Configuration options for China Postal Code symbology, including check-sum and code length.

3.13 MSI/Plessey

Settings for MSI/Plessey barcode symbology, including check-sum verification and code length.

3.14 CODE 32 (Italian Pharma-Code)

Configuration options for CODE 32 (Italian Pharma-Code) symbology, including check-sum.

3.15 CODE 11

Settings for CODE 11 barcode symbology, including check-sum verification and code length.

3.16 Telepen

Configuration options for Telepen barcode symbology, including check-sum and data format.

3.17 GS1 Data Bar (RSS)

Settings for GS1 Data Bar (RSS) symbologies, enabling or disabling variants like RSS-14.

3.18 Function Key Emulation

Configures function key emulation and code 39 format for special key functions.