POS-X ION Short Range - Chapter 1 System Information; 1.1 About this manual; 1.2 How to set up the parameter -I

- 3 -
Chapter 1 - System Informa on
1.1 About this manual
This User's Guide provides detailed programming instruc
ons. Barcode
scanners are factory programmed for the most common communica
on
se
ngs. If you need to change these se ngs, programming is accomplished
by scanning the bar codes in this guide.
1.2 How to set up the parameter -I
(1) Scan Start Configura
on
(2)
(3) Scan End Configura
on to end the programming
Start configura on End configura on
Standard Product Defaults Se
ng
Check Version
An asterisk (*) next to an op
on indicates the default se ng.
Scan all necessary barcodes