Need help?Do you have a question about the POS-X EVO 2D and is the answer not in the manual?
General| Brand | POS-X |
|---|---|
| Model | EVO 2D |
| Category | Barcode Reader |
| Language | English |
CE marking, EMC, and Low Voltage Directives compliance.
WEEE compliance and responsible disposal instructions.
LED safety statement and CB Scheme certification.
IP40 rating, and warning about hot scanner parts.
Introduction to the guide and steps for unpacking the device.
Instructions for connecting the scanner to a computer using a USB port.
Guidance on using the viewfinder and aiming beam for optimal barcode reads.
Information on programming via menu bar codes and security settings.
How to set and save custom default scanner settings.
Procedures for resetting custom and factory default scanner settings.
Overview of interface programming, Plug and Play, and Keyboard Wedge setup.
Configuring USB SurePos and USB PC/Macintosh keyboard interfaces.
Configuring power-up beeper and trigger click sounds.
Adjusting beeper volume, pitch, and duration for good reads.
Understanding how prefixes and suffixes alter scanned data output.
Procedures for adding, clearing, and managing prefixes/suffixes.
Introduction to the Data Format Editor for customizing scanner output.
Steps to add, save, and clear data formats for specific symbologies.
Enabling all symbologies, message length, and basic symbology settings.
Settings for popular symbologies like Codabar, Code 39, and Interleaved 2 of 5.
Configurations for Code 128, GS1-128, UPC-A, and EAN/JAN codes.
Settings for UPC-E, MSI, DataBar, QR Codes, and other symbologies.
Mapping keyboard function codes to Hex/ASCII and CTRL+ keys.
Reference table for supported keys across PC and Mac interfaces.
Displaying decoder, driver, software revisions, and data formats.
Using the test menu and setting temporary Code I.D. prefixes.
Detailed specs on mechanical, electrical, environmental, and scan performance.
Pinout diagrams for Keyboard Wedge and USB interface cables.
Procedures for cleaning the scanner and inspecting cables.
Replacing interface cables and troubleshooting common scanner issues.
Contact information for support and warranty details.
Charts for symbology IDs, ASCII codes, and code page mappings.
To Next Page
