POS-X EVO 2D - Chapter 3: Input;Output Settings; Beeper and Trigger Feedback

3 - 1
3
Input/Output Settings
Power Up Beeper
The scanner can be programmed to beep when it’s powered up. Scan the Off
bar code(s) if you don’t want a power up beep.
Default = Power Up Beeper On
- Scanner.
Trigger Click
To hear an audible click every time the scanner button is pressed, scan the Trig-
ger Click On bar code below. Scan the Trigger Click Off code if you don’t
wish to hear the click. (This feature has no effect on serial or automatic trigger-
ing.)
Default =
Trigger Click Off.
Power Up Beeper Off -
Scanner
* Power Up Beeper On -
Scanner
Trigger Click On
*Trigger Click Off