6 - 27
UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use
UPC-E0 (page 6-24). If you need to read codes that lead with the 1 number
system, use the UPC-E1 On selection.
Default = Off.
EAN/JAN-13
<Default All EAN/JAN Settings>
EAN/JAN-13 On/Off
Note: If you want to convert UPC-A bar codes to EAN-13 format, scan the UPC-
A Off bar code on page 6-21.
To Next Page
Loading...
