Posh POS 708 - Dip Switch Options

To Next Page

To Previous Page

POS 708 USER MANUAL Ver. 1.6

Figure 5: Dip Switch On/Off Position and numbering

Sw1 (ON): Alarm ON will stay on for only 60 seconds if any Drawers are left open for more then XX

Seconds

Sw1 (OFF): Alarm ON will Stays on until all Drawers are closed

Sw2 Sw 3: Wait Time when any drawer is open before sounding Alarm. See Table 1

Sw4 (ON): Alarm Speaker Eenabled

Sw4 (OFF): Alarm Speaker Disabled

Alarm Option A Sw1 (ON): Alarm will sound when drawer is open for XX seconds then turn off Alarm after 60

seconds or close all drawers.

Alarm Option B Sw1 (OFF): Alarm will sound when drawer is open for XX seconds. Close drawer to turn off

Alarm.

Table 1: POS708 Dip Switch 2-3

POS 708-RS232 Communication setting: 9600 Baud, 8 Data Bits, No Parity, 1 Stop bit