EasyManua.ls Logo

POSIFLEX KS – 6715 User Manual

POSIFLEX KS – 6715
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Part 1
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex Technology, Inc. will assume no liability for any technical inaccuracies or
editorial or other errors or omissions contained herein, nor for direct, indirect,
incidental, consequential or otherwise damages, including without limitation loss of
data or profits, resulting from the furnishing, performance, or use of this material.
This information is provided as is and Posiflex Technology, Inc. expressly disclaims
any warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex Technology, Inc. reserves the
right to alter product designs, layouts or drivers without notification. The system
integrator shall provide applicative notices and arrangement for special options utilizing
this product. The user may find the most up to date information of the hardware from:
http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Technology, Inc. the publisher of this documentation.
© Copyright Posiflex Technology, Inc. 2012
All brand and product names and trademarks are the property of their respective holders.
KS 6715
Fan Free Touch Terminal
Users Manual
Rev.: A1
P/N: 16510900020
Question and Answer IconNeed help?

Do you have a question about the POSIFLEX KS – 6715 and is the answer not in the manual?

POSIFLEX KS – 6715 Specifications

General IconGeneral
BrandPOSIFLEX
ModelKS – 6715
CategoryTouch terminals
LanguageEnglish

Summary

Installation Guide

Product Overview and Identification

Product Pictures - Gen.6 Base Stand

Product Features and Identification

Standard Product Features

Outlines CPU, casing, storage, base design, and supported operating systems.

Detailed Product Features and Options

Cable Cover and Cable Disconnection

Disconnecting Cables Safely

Guidelines for disconnecting cables, emphasizing proper orientation and connector handling.

Separating Unit and Cable Management

Separating Main Unit from Base Stand

Procedures for detaching the main unit from both Gen.5 and Gen.6 base stands.

Base and Unit Preparation

Main Unit Service Window Access

Explains accessing the service window for upgrades like SODIMM and HDD connections.

Upgrade Kit Installation

Display and Cash Drawer Connections

Connecting Cash Drawers

Instructions for connecting cash drawers using RJ11 connectors and optional cables.

Cable and Mounting Procedures

Connecting System Cables

General guidelines for connecting various system cables, ensuring correct ports and orientation.

Desktop Mounting Instructions

Detailed steps for mounting the main unit onto a desk or counter.

Mounting and OS Recovery

Operating System Recovery Process

Guide on using the recovery DVD for OS restoration and driver management.

System Operation and Environment

Power Management and Indicators

Hardware Power Switch Operation

Details the main unit's power switch, including normal and forced power-off functions.

Software Features and Controls

Display and Port Information

Touch Panel Manager

Related product manuals