EasyManua.ls Logo

POSIFLEX XT–3015 User Manual

POSIFLEX XT–3015
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
B of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his owns expense will be
required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happening. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors
or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise
damages, including without limitation loss of data or profits, resulting from the furnishing,
performance, or use of this material. This information is provided “as is” and Posiflex Technology,
Inc. expressly disclaims any warranties, expressed, implied or statutory, including without
limitation implied warranties of merchantability or fitness for particular purpose, good title and
against infringement. The information in this manual contains only essential hardware concerns
for general user and is subject to change without notice. Posiflex Technology, Inc. reserves the
right to alter product designs, layouts or drivers without notification. The system integrator shall
provide applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from: http://www.posiflex.com
or
http://www.posiflex.com.tw or http://www.posiflexusa.com . All data should be backed-up prior to
the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss
of data resulting from the use, disuse or misuse of this or any other Posiflex product. All rights are
strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise,
without prior expressly written consent from Posiflex Technology, Inc. the publisher of this
documentation.
© Copyright Posiflex Technology, Inc. 2016
All brand and product names and trademarks are the property of their respective holders.
XT– 3015/3017/3215/3215I
Fanfree LCD Touch Terminal
User’s Manual
Rev.: C0
P/N: 16640900040
Question and Answer IconNeed help?

Do you have a question about the POSIFLEX XT–3015 and is the answer not in the manual?

POSIFLEX XT–3015 Specifications

General IconGeneral
BrandPOSIFLEX
ModelXT–3015
CategoryTouch terminals
LanguageEnglish

Summary

Parts Identification

I/O Plate Views

I/O Plate View for XT-3015/3215/32151

Detailed illustration and labeling of input/output ports for XT-3015, XT-3215, and XT-32151 models.

I/O Plate View for XT-3017

Detailed illustration and labeling of input/output ports for the XT-3017 model.

Product Features and Specifications

Standard Features

Overview of system specifications including CPU, chipset, data storage, OS support, and memory.

Mechanical Structure

Description of the physical design, casing, touch panel types, base design, and construction.

Installation and Cable Management

Cable Routing and Passage

Instructions for routing cables through the base for Gen 7/8/7E/8E models, including base cover removal.

Upgrade Kit Installation

Rear Mount Upgrade Kit

Instructions for installing a rear mount upgrade kit to attach a second LCD display to the system.

System Installation and Environment

UPS Battery Installation

Step-by-step guide for installing a UPS battery pack inside the Gen 8/8E base unit.

Power Operation and Indicators

Power On/Off Procedures

Instructions on how to power the unit on and off using the side cover power switch.

System Power Control and Wake-up

Hardware Power Switch Functionality

Details the function of the physical power switch and procedures for normal and emergency shutdowns.

Connectivity and Peripherals

Serial Ports (COM1/2/3/4)

Details on serial port types, connectors (DB9, RJ50), and power supply capabilities (+5V/+12V DC).

Related product manuals