EasyManua.ls Logo

Potensic D58 - The installation methods of mobile phone; Parts install and disassemb; Charging Instruction for Drone Battery; Li-Po Battery Disposal & Recycling

Potensic D58
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
The installation methods of mobile phone
Hold the bottom buckle of transmitter; Pull down the holder until it can fit the
mobile phone; Put on the phone and release the holder; and then the phone
is fixed well.
(Picture 2/3)
Notice: Don’t clamp the buttons of the phone.
Picture 2 Picture 3
Charging Instruction for Drone Battery
Parts install and disassemb
* For faster charging, it is recommended to use an adapter with 5V 2A output current
(not included) to charge the battery
1. Connect the drone battery with USB cable first and then choose one of the
methods as below pictures shown to connect with USB plug.
2. The red USB indicator light keeps bright when charging for drone battery and
the light turns green when the battery is fully charged.
Drone Battery
Power BankPhone Charger
Computer Charging Car Charger
Li-Po Battery Disposal & Recycling
Wasted Lithium-Polymer batteries must not be placed with household
trash. Please contact local environmental or waste agency or the
supplier of your model or your nearest Li-Po battery recycling center.
http://www.ipotensic.com

Related product manuals