Need help?Do you have a question about the Potterton SIRIUS THREE FS 50 and is the answer not in the manual?
General| Type | Floor Standing |
|---|---|
| Output | 50 kW |
| Fuel Type | Natural Gas |
| Efficiency | Up to 97% |
| Weight | 160 kg |
| kW Output | 50 kW |
Essential safety guidelines for appliance usage, covering user responsibilities and hazard warnings.
Important advice for optimal and safe operation, including warranty considerations and maintenance tips.
Defines the responsibilities of the manufacturer and installer concerning appliance safety and proper use.
Information about the intended audience, scope, and purpose of the installation manual.
Explains the meaning of various symbols and icons used throughout the manual for clarity.
Lists the European directives, regulations, and standards the appliance complies with.
Provides detailed performance figures, operating ranges, and electrical specifications.
Illustrates the physical layout, dimensions, and connection points of the boiler.
Presents the wiring schematic for the boiler's internal electrical components and connections.
Highlights key features, characteristics, and benefits of the condensing gas boiler.
Explains how the boiler's core systems, like heating and water circuits, function.
Identifies and describes the primary physical parts and modules of the boiler unit.
Details the functions, buttons, and display symbols of the boiler's control interface.
Specifies mandatory requirements, safety standards, and installer qualifications for boiler installation.
Outlines necessary conditions for water, gas, and electrical supply for proper operation.
Guides on selecting an appropriate, safe, and accessible installation site for the boiler.
Provides essential guidelines and precautions for safely moving and handling the boiler during transport.
Step-by-step instructions for safely removing the boiler from packaging and initial setup.
Illustrates various hydraulic and electrical connection configurations for different system setups.
General principles and regulatory requirements to follow during the boiler installation process.
Steps for accessing internal boiler components and preparing the unit for installation.
Detailed instructions for connecting heating, expansion, and condensate pipes correctly.
Procedures for safely connecting the gas supply line to the boiler, including safety checks.
Guidelines for installing air intake and flue gas discharge systems according to configurations.
Instructions for making safe and correct electrical connections to the boiler's power and control systems.
Explains the purpose and process of boiler commissioning for first-time use or after shutdown.
A comprehensive checklist to ensure all aspects are ready before initial boiler startup.
Step-by-step guide for initial boiler setup, synchronization, and verification.
Procedures for configuring gas parameters like fan speed, air/gas ratio, and CO2 levels.
Instructions for setting up the boiler for specific system configurations like cascades or 0-10V control.
How to navigate and use the boiler's control panel to adjust settings and monitor operation.
Step-by-step instructions for safely starting the boiler from a shutdown or standby state.
Procedures for safely shutting down the boiler or putting it into standby mode.
Explanation of the boiler's frost protection mechanism and how to activate or manage it.
Overview of available parameters accessible via shortcuts, information, and operator menus.
Detailed guide on adjusting various operational, system, and timer parameters for optimal performance.
How to view operational data, status information, and error logs from the boiler.
Recommendations for regular boiler inspection, professional servicing, and warranty considerations.
Procedures for routine checks, cleaning, and replacement of worn parts.
Instructions for safely locating and replacing blown fuses in the boiler's electrical system.
Lists and explains common error codes displayed by the boiler, along with potential causes.
Describes how certain error codes are automatically resolved when the fault condition ceases.
Manual procedure to clear error codes from the display after resolving the underlying issue.
Steps for safely shutting down, disconnecting, and preparing the boiler for removal or disposal.
Instructions for safely reconnecting and starting up a previously decommissioned boiler.
Guidelines for the safe and environmentally responsible removal and recycling of the boiler unit.
Statement confirming the unit's compliance with relevant European directives and standards.
To Next Page