What to do if Potterton SIRIUS THREE FS 130 Boiler shows Error 162 related to the air pressure switch?
If your Potterton Boiler displays Error 162, which relates to the air pressure switch, the suggested solution is to check the air inlet and combustion products discharge pipes for any blockages. If blocked, clear them.
How to fix Potterton SIRIUS THREE FS 130 Boiler Error 110: Lockout SLT?
To address Error 110 (Lockout SLT) on your Potterton Boiler, you should: 1. Remove the heat exchanger. 2. Replace the insulation behind the burner bracket. 3. Replace the safety thermofuse behind the heat exchanger.
Essential safety guidelines for installers and end-users regarding appliance operation and hazards.
Key recommendations for safe and efficient installation, operation, and maintenance of the boiler.
Defines the liabilities of the manufacturer, installer, and user regarding the appliance.
Explanation of danger levels and important symbols used throughout the manual for user safety.
Identification and explanation of symbols found on the appliance itself.
Details European directives and standards the product complies with, including gas category.
Provides detailed technical data including heat output, efficiency, and electrical specifications.
Illustrates the physical dimensions and connection points of the boiler models.
Presents the electrical wiring diagrams for different boiler models.
Overview of the boiler's characteristics, including low emissions and high efficiency.
Explains how the circulating pump and gas/air mixture system function.
Identifies and describes the primary components of the boiler system.
Details the control panel layout, keys, and symbols for operation.
Lists the items included in the standard package with the boiler.
Refers to a catalogue for a detailed list of available accessories and options.
Highlights installer qualifications and general installation guidelines.
Covers water treatment, gas supply, electrical power, and circulating pump requirements.
Provides guidance on selecting an appropriate and safe location for the boiler installation.
Details the procedures for safely transporting and unpacking the boiler.
Hydraulic and electrical connection diagrams for a single boiler setup with a direct circuit and DHW.
Hydraulic and electrical connection diagrams for a boiler with underfloor heating, direct circuit, and DHW.
Hydraulic and electrical connection diagrams for boilers in cascade with complex heating circuits.
Details electrical connections and configuration for controlling the boiler via a 0-10V signal.
General guidelines for carrying out the installation in accordance with regulations.
Instructions on how to safely access the internal parts of the boiler for installation.
Detailed steps for connecting the heating circuit, expansion vessel, and siphon.
Procedures for connecting the gas supply to the boiler, including safety warnings.
Guidelines for configuring and installing air supply and flue gas outlet systems.
Instructions for making safe electrical connections, including wiring terminal blocks.
Steps for filling the heating installation and venting air for optimal operation.
Final steps to complete the boiler installation, including reconnecting panels.
Overview of the boiler commissioning process for first-time use or after shutdowns.
A checklist of essential checks to perform before starting the commissioning process.
Detailed steps for checking gas inlet, electrical connections, and hydraulic circuits.
Procedures for configuring fan speed and air/gas ratios for different gas types.
Guide to modifying user and installer parameters via the control panel interface.
Instructions for safely starting the boiler after installation or shutdown.
Procedures for stopping the boiler, including standby mode and power off.
Explanation of the frost protection function and how to activate it.
Details on activating special functions like manual control and chimney sweep.
Categorized lists of user and installer parameters for system configuration.
Step-by-step guides for setting date, time, language, operating modes, and timers.
Instructions on how to access and navigate the information menu for diagnostics.
Recommendations for regular boiler inspection and servicing by qualified professionals.
Detailed procedures for performing annual service, removing the burner, and cleaning components.
List of error codes, their descriptions, and procedures for resolving issues.
Explanation of how certain error codes are automatically cleared when the fault condition is resolved.
Manual procedure to clear error codes that persist after the cause has been resolved.
Steps for safely switching off and preparing the boiler for temporary or permanent shutdown.
Steps for safely recommissioning the boiler after a shutdown or maintenance.
Information on identifying and ordering genuine spare parts for the boiler.
Tips and advice for optimizing energy efficiency during boiler operation.
Guidance on selecting and setting room thermostats for optimal comfort and energy consumption.
Thank you message and recommendation for regular maintenance for continued operation.
Details the warranty coverage, exclusions, and conditions for the appliance.
To Next Page
General