What to do if Potterton SIRIUS THREE FS 200 shows Error 162 related to the air pressure switch?
If your Potterton Boiler displays Error 162, which relates to the air pressure switch, the suggested solution is to check the air inlet and combustion products discharge pipes for any blockages. If blocked, clear them.
How to fix Potterton SIRIUS THREE FS 200 Error 110: Lockout SLT?
To address Error 110 (Lockout SLT) on your Potterton Boiler, you should: 1. Remove the heat exchanger. 2. Replace the insulation behind the burner bracket. 3. Replace the safety thermofuse behind the heat exchanger.
General| Type | Floor Standing |
|---|---|
| Fuel Type | Natural Gas |
| Efficiency | 96.5% |
| Weight | 280 kg |
| Mounting | Floor Standing |
| Output (BTU/h) | 200, 000 BTU/h |
| Fuel | Natural Gas |
Safety guidelines for installers and end users, covering hazards and precautions.
Describes various safety features and operational settings of the boiler.
Covers regulatory requirements and installer qualifications for safe installation.
Outlines critical prerequisites for water, gas, and electrical supply.
Specifies ventilation requirements for the boiler room according to national standards.
Settings required to configure master and slave boilers in a cascade.
General principles and regulatory adherence for installation.
Detailed steps for connecting the heating circuit, including valves and safety features.
Instructions for safely connecting the gas supply to the boiler.
Guidance on installing air intake and flue gas discharge pipes.
Essential checks before starting the boiler for the first time.
Detailed steps for initial start-up, including gas, electrical, and hydraulic checks.
Procedure for verifying gas supply pressure and connection integrity.
Verification of power supply, sensors, and pump connections.
Steps for synchronizing the control panel and setting initial parameters.
Adjustment of fan speed and air/gas ratio based on gas type and output.
Procedure to optimize combustion at maximum heat output.
Steps and precautions for converting the boiler to operate on propane.
Steps to safely start the boiler for operation.
Importance of regular servicing and professional maintenance.
Procedures for routine checks and maintenance tasks.
Detailed steps for carrying out the annual service.
Explains error code display and general troubleshooting advice.
Comprehensive list of error codes and their meanings.
To Next Page