EasyManua.ls Logo

Potterton Sirius two WH 110 kW User Manual

Potterton Sirius two WH 110 kW
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Working towards
a cleaner future
Sirius two WH
90 & 110 kW
Instruction manual for users and fitters
To be kept by the user July 2014
heating specialists
Question and Answer IconNeed help?

Do you have a question about the Potterton Sirius two WH 110 kW and is the answer not in the manual?

Potterton Sirius two WH 110 kW Specifications

General IconGeneral
TypeWall Hung
Output110 kW
Fuel TypeNatural Gas
Weight98kg
Boiler TypeCondensing

Summary

Description of Symbols

Safety Warnings

Critical safety instructions for users, including handling gas and combustion fumes.

Smell of Gas

Immediate actions and precautions to take when smelling gas near the boiler.

Smell of Combustion Fumes

Actions to take if combustion fumes are detected, including ventilation and contacting service.

Servicing and Cleaning the Boiler

Mandatory safety step to switch off the boiler before any maintenance or cleaning.

General Precautions

Commissioning the Boiler

Gas Conversion

Faults

Fault Code List

A comprehensive list of fault codes displayed by the boiler and their meanings.

Filling the System

Routine Maintenance Instructions

Instructions Prior to Installation

Installing the Boiler

Installing the Flues

Electrical Connections

Connecting the Room Thermostat

Room Sensor Configuration

Flow Temperature Modulation

Outdoor Sensor Installation

Setting the "Kt" Climate Curve

System Components and Management

Special Functions

Commissioning Function

Procedure for commissioning the gas valve and adjusting boiler power.

Faults That Cannot Be Reset by the User

Parameter Settings

Zone 1 Heating Parameters

Zone 2 Heating Parameters

DHW Parameters

Boiler Parameters

Configuration Parameters

Maintenance Parameters

Burner Control Parameters

Gas Valve Commissioning

Commissioning Maximum Heat Output

Procedure to adjust the gas valve for maximum heat output based on CO₂ readings.

Commissioning Reduced Heat Output

Procedure to adjust the gas valve for reduced heat output based on CO₂ readings.

Gas Conversion Instructions

Adjustment and Safety Devices

Safety Devices Overview

Explanation of critical safety devices like thermostats, pressure switches, and flame detectors.

Annual Servicing

Clean the Heat Exchanger

Checking the Burner

Cleaning the Condensate Trap

Combustion Parameters

Technical Specifications

Wiring Diagram

Installation Dimensions

Boiler Dimensions

Flue Installation Examples

Weather Compensation Curve Graphs

Hydraulic Diagrams

Cascade and System Diagrams

Related product manuals