What to do if Potterton SIRIUS THREE FS 150 shows Error 162 related to the air pressure switch?
If your Potterton Boiler displays Error 162, which relates to the air pressure switch, the suggested solution is to check the air inlet and combustion products discharge pipes for any blockages. If blocked, clear them.
How to fix Potterton SIRIUS THREE FS 150 Error 110: Lockout SLT?
To address Error 110 (Lockout SLT) on your Potterton Boiler, you should: 1. Remove the heat exchanger. 2. Replace the insulation behind the burner bracket. 3. Replace the safety thermofuse behind the heat exchanger.
Instructions for installers and end-users regarding potential hazards and safe operation.
Provides detailed performance and operational data for all boiler models.
Specifies regulatory requirements and installer qualifications for boiler installation.
Details pre-installation checks for water, gas, and electrical supplies.
Instructions for connecting heating, expansion, and condensate lines.
Steps for safely connecting the gas supply to the boiler.
Details requirements for flue gas and air intake pipe configurations.
Guidance on connecting power supply, wiring, and terminal blocks.
Procedures for filling the heating system and venting air.
Step-by-step guide for commissioning the boiler, including gas and electrical checks.
Configuration of fan speed, air/gas ratio, and gas valves for correct operation.
Steps for the initial startup procedure of the boiler.
Detailed instructions on configuring various boiler parameters.
Recommendations for regular boiler inspection, servicing, and safety precautions.
Detailed procedures for annual service, burner removal, and component checks.
Lists and explains common error codes displayed by the boiler and their meanings.
To Next Page
General