Need help?Do you have a question about the Potterton Paramount three 95 and is the answer not in the manual?
Defines the intended use of the gas-fired devices.
Provides crucial safety guidelines for installation and operation.
Declares conformity with EU directives and standards.
Provides detailed technical specifications and performance data.
Illustrates the electrical connections and components of the system.
Outlines the necessary quality and treatment for heating water.
Details methods for treating and preparing heating water for optimal system performance.
Details the procedure for connecting the heating circuit to the boiler.
Explains the correct installation and connection of the safety valve.
Covers the requirements for connecting the flue gas system for condensing boilers.
Provides data and specifications for exhaust gas systems based on flue type.
Details the procedure for assembling the exhaust gas system.
Outlines the procedure and requirements for connecting the gas supply.
Details the procedure for checking the gas system for leaks.
Explains how to purge the gas line before commissioning.
Specifies the required supply pressure range for natural and liquid gas.
Outlines general electrical connection requirements and safety.
Guides through the initial commissioning menu sequence.
Describes the procedure for switching on the boiler and its components.
Outlines essential information to provide to the customer upon handover.
Specifies key points to explain to the customer about operation and safety.
Provides a checklist for ensuring proper commissioning.
Identifies and explains the function of the boiler's operating elements.
Explains the symbols and information displayed on the boiler's control unit.
Details how to set the comfort setpoint for room temperature control.
Describes how to interpret and obtain more information about error messages.
Outlines the steps to access and navigate programming levels.
Explains how to modify parameters within the setting levels.
Provides a comprehensive table of adjustable parameters and their settings.
Details how to set the system's time and date for correct operation.
Describes how to set and configure time programs for heating circuits and DHW.
Covers settings for comfort, reduced, and frost protection setpoints, and heating curves.
Details settings for domestic hot water nominal and reduced setpoints, and release functions.
Covers boiler operation parameters like release temperatures, setpoints, and burner control.
Details fault messages, diagnostic codes, and error history.
Details parameters related to burner operation, including prepurge and postpurge times.
Outlines recommended annual inspection and maintenance tasks.
Lists fault codes, their descriptions, and potential explanations or causes.
To Next Page
General