Pottery Barn Canopy Bed Frame - Assembly Instructions; Initial Frame Assembly


Date:8‐Jun‐15www.potterybarn.com  Page4of12
Rev: 



Assembly Instruction Steps:
1. Attach Rail (A) to Rail (C) as shown, choose the correct holes for your bed size, insert Bolt (a) and tighten with
4mm Allen Wrench (f). Repeat this step for Rail (B&D) and 2 sets of Rail (E&F).
A
B
C
D
F
E
a
a
2X
1X
1X
The two holes are for Queen size
The two holes are for CK size
The two holes are for King size
Choose the correct holes for your bed size as shown