Pottery Barn Chloe - Secure Tabletop to Legs; Secure Shelf Fittings

4/5
5. Insert (2) Allen bolts with washers through the pre-drilled holes on the tabletop (A) apron and into the leg. Use hand
to screw half way then use the Allen key (G) to continue tightening but do not fully tighten at this time. Repeat for
the remaining corners of the tabletop (A). (Fig. 6)
6. Insert fittings (H) over the hanger bolt at the four corners of the shelf (B) followed by a flat washer (D), a lock washer
(E) and a nut (I). Tighten with the Allen wrench (J). (Fig. 7)
Fi
g
. 6
Fi
g
. 7
Loosen Ti
g
hten
Use the long end of the Allen
key for easy securing
Loosen Ti
g
hten