To Next PageTo Next Page
Need help?Do you have a question about the Pottinger NOVACAT 262 and is the answer not in the manual?
Lists different NOVACAT disc mower models and their types.
Directs users to the PÖTPRO platform for additional machine information.
Key items to verify during the product handover process.
Explains the manual's intent, focusing on safe handling and maintenance.
Defines symbols like DANGER, WARNING, CAUTION, and NOTE.
Details specific warning signs and their meanings for hazard awareness.
Lists different NOVACAT models and their respective working widths.
Diagram and labels identifying components of NOVACAT 262 and 302.
Diagram and labels identifying components of NOVACAT ED/RC and 352V.
Tractor power, linkage type, and importance of front axle ballast.
Details necessary hydraulic connections and operating pressures, plus electrical.
Highlights dangers and essential precautions when attaching the implement.
Steps for setting the lifting gear height and mounting frame horizontal position.
Adjusting the upper link for cutting height and setting hydraulic relief pressure.
Procedures for trial run, PTO speed, rotation, and checking lights.
Steps for safely folding the mower into field transport position.
Steps for safely unfolding the mower into working position.
Essential safety checks and precautions before starting machine operation.
Adjustments for hydraulic system, headstock, and cutting height.
Instructions for opening and closing protective covers on specific models.
Instructions for opening and closing protective covers on ED/RC/352V models.
Procedures for starting up and understanding the anti-collision safety function.
Detailed steps for adjusting mechanical and hydraulic anti-collision safety.
Safety warnings and precautions related to unhitching and parking the machine.
Step-by-step guide for safely unhitching the implement from the tractor.
Instructions for safely parking the implement in transport position.
Identifies tipping hazards on slopes and provides counter-measures.
Explains the purpose of conditioning and how to adjust intensity.
Adjusting mowing flap, checking V-belt tension, and positioning rotor tines.
Adjusting swath plates and procedures for coupling/uncoupling the conditioner.
Step-by-step guide for safely detaching the tine conditioner unit.
Checking centre bearing screws and tensioner pulley run for proper function.
Visual guides showing rotor tine placement for different operating conditions.
Dangers when mowing without conditioner and necessary protective elements.
Adjusting swath width with discs, setting springs, and using conveying cones.
Safety warnings for roller conditioners and identification of key components.
Adjusting roller gap, spring tension, and swath board positions.
Driving speed, working without conditioner, and removing cutter bar reinforcement.
Cleaning the auxiliary drive and checking/adjusting belt tension.
Adjusting main drive belt tension and lubricating the drive components.
Procedure for draining and refilling gear oil in the conditioner.
Critical safety measures to follow during maintenance work.
Maintenance guidelines for articulated shafts and the hydraulic unit.
Procedure for checking the oil level in the cutter bar.
Instructions for topping up oil and performing oil changes.
Oil changes for angular gears and procedure for installing cutter blades.
Procedure for checking wear on blades, holders, and bolts for unbalance.
Steps for safely removing and installing blade bolts.
Lists the necessary hydraulic and electrical connections for the tractor.
Location of the identification plate and definition of the mower's intended use.
Guidance on manual handling and qualifications for machine operators.
Covers asbestos, transport of people, and general driving safety.
Instructions for adapting cardan shaft length and safety chain usage.
Procedure for checking and setting the friction clutch on driveshafts.
Defines symbols used in the lubrication charts for clarity.
Details lubrication points and quantities for specific NOVACAT models.
Explains lubricant codes and provides specifications for oils and greases.
A table listing lubricants from various manufacturers.
Visual guide showing recommended positions for conical discs.
Visual guide for conical disc positions on different mower models.
Step-by-step instructions for fitting and removing taper bushes.
Diagram illustrating the hydraulic system for NOVACAT 262 and 302.
Diagram illustrating the hydraulic system for ED/RC models.
Formulas for calculating necessary ballasting for tractor-implement combinations.
Calculations for real axle loads and permissible tyre load capacity.
Details manufacturer information and compliance with relevant directives.
Contact details for Pöttinger's various international offices and service centers.
General| Brand | Pottinger |
|---|---|
| Model | NOVACAT 262 |
| Category | Farm Equipment |
| Language | English |
