Poulan Pro 530165293-01

Questions and Answers

C
Christopher BlakeAug 11, 2025
What to do if my Poulan Pro 530165293-01 Chainsaw engine will not start?
- U
  udavisAug 11, 2025
  If your Poulan Pro Chainsaw engine won't start or dies quickly, here's what to check: * Ensure the ignition switch is set to ON. * Refill the fuel tank with the correct fuel mixture. * Install a new spark plug. * Check the fuel filter for dirt and replace if needed. Also, inspect the fuel line for kinks or splits, and repair or replace it as necessary. * If the engine is flooded, refer to the “Difficult Starting” section in the Operation Section.
D
Dean TorresAug 17, 2025
How to fix Poulan Pro 530165293-01 Chainsaw that will not idle properly?
- N
  nancy82Aug 17, 2025
  If your Poulan Pro Chainsaw engine won't idle properly, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the carburetor may require adjustment by an authorized service dealer.
S
Spencer RodriguezAug 25, 2025
What to do if the chain moves at idle speed on my Poulan Pro Chainsaw?
- J
  Jennifer GreenAug 25, 2025
  If the chain on your Poulan Pro Chainsaw moves at idle speed, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the clutch may require repair by an authorized service dealer.
M
Michelle AlvaradoAug 29, 2025
Why Poulan Pro 530165293-01 engine will not accelerate?
- S
  Stacey MillerAug 29, 2025
  If your Poulan Pro Chainsaw engine won't accelerate, lacks power, or dies under a load, consider the following: 1. Clean or replace the air filter. 2. Clean or replace the spark plug and regap it. 3. Ensure the chain brake is disengaged. 4. If these steps don't resolve the issue, the carburetor may require adjustment by an authorized service dealer.
C
Caroline SchroederSep 5, 2025
Why does my Poulan Pro Chainsaw smoke so much?
- J
  James GreerSep 5, 2025
  If your Poulan Pro Chainsaw engine smokes excessively, it's likely due to too much oil in the fuel mixture. Empty the fuel tank and refill it with the correct fuel mixture.