EasyManua.ls Logo

Poulan Pro 545186803 - User Manual

Poulan Pro 545186803
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PP4620AVX
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d ’inst ructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
ENGLISH
ESPAÑOL
FRANÇAIS
R
Poulan PRO
1030 Stevens Creek Road
Augusta, GA 30907
Poulan PRO
850 Matheson Blvd. West
Mississauga, Ontario L5V 0B4
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.
1-800-554-6723
www.poulan --pro.com
545186803 Rev. 3 5/15/09 BRW

Questions and Answers

  • V
    Vincent GeorgeAug 12, 2025
    What to do if my Poulan Pro 545186803 engine will not start?
    • M
      Michael GarrisonAug 12, 2025
      If your Poulan Pro Chainsaw engine won't start or runs only briefly, here are a few things to check: * Ensure the ignition switch is in the ON position. * Make sure the fuel tank isn't empty; if it is, fill it with the correct fuel mixture. * A spark plug that is not firing can also cause this issue; install a new spark plug. * Check if fuel is reaching the carburetor. A dirty fuel filter should be replaced and kinked or split fuel lines should be repaired or replaced. * The engine may be flooded. Refer to the “Difficult Starting” section in the Operation Section.
  • J
    Jeremy KempAug 17, 2025
    Why Poulan Pro 545186803 Chainsaw engine will not accelerate?
    • J
      Joseph KiddAug 17, 2025
      If your Poulan Pro Chainsaw engine lacks power, won't accelerate, or dies under load: * Begin by cleaning or replacing the air filter. * Clean, regap, or replace the spark plug. * Ensure the chain brake is disengaged. * The carburetor may need adjustment; contact an authorized service dealer.
  • M
    mhernandezAug 25, 2025
    What to do if Poulan Pro 545186803 will not idle properly?
    • J
      Joseph DoyleAug 25, 2025
      If your Poulan Pro Chainsaw engine will not idle properly: * The carburetor may need adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * Worn crankshaft seals can also cause idling issues; contact an authorized service dealer.
  • L
    leblancnicholasAug 30, 2025
    Why is my Poulan Pro 545186803 smoking so much?
    • M
      Michele MaciasAug 30, 2025
      If your Poulan Pro Chainsaw smokes excessively, it's likely due to too much oil in the fuel mixture. Empty the fuel tank and refill it with the correct fuel mixture.
  • S
    Stacey ClarkSep 4, 2025
    Why does my Poulan Pro 545186803 Chainsaw chain move at idle speed?
    • G
      George OliverSep 4, 2025
      If the chain on your Poulan Pro Chainsaw moves at idle speed: * The idle speed may need adjustment; see “Carburetor Adjustment” in the Service and Adjustments Section. * The clutch may require repair; contact an authorized service dealer.

Poulan Pro 545186803 Specifications

General IconGeneral
BrandPoulan Pro
Model545186803
CategoryChainsaw
LanguageEnglish

Related product manuals