EasyManua.ls Logo

Poulan Pro 545137224 - User Manual

Poulan Pro 545137224
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
P3314 / P3314WS / P3314WSA
P3416 / P3516PR / P4018WM
P4018WT / P3818AV
P4018AV / P4018AV BH
Poulan
1030 Stevens Creek Road
Augusta, GA 30907
ENGLISH
ESPAÑOL
FRANÇAIS
545137224 11/30/06
R
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.
1--800--554--6723
www.poulan.com
For Occasional U se Only
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manua l de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Poulan
5855 Terry Fox Way
Mississauga, Ontario L5V 3E4

Questions and Answers

  • K
    kristy34Aug 11, 2025
    What to do if my Poulan Pro Chainsaw engine will not start?
    • C
      christopherjohnsonAug 11, 2025
      If your Poulan Pro Chainsaw engine won't start or dies quickly, here's what to check: * Ensure the ignition switch is set to ON. * Refill the fuel tank with the correct fuel mixture. * Install a new spark plug. * Check the fuel filter for dirt and replace if needed. Also, inspect the fuel line for kinks or splits, and repair or replace it as necessary. * If the engine is flooded, refer to the “Difficult Starting” section in the Operation Section.
  • T
    Taylor HubbardAug 17, 2025
    How to fix Poulan Pro 545137224 Chainsaw that will not idle properly?
    • J
      Jaime JacksonAug 17, 2025
      If your Poulan Pro Chainsaw engine won't idle properly, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the carburetor may require adjustment by an authorized service dealer.
  • Y
    Yolanda WalkerAug 25, 2025
    What to do if the chain moves at idle speed on my Poulan Pro 545137224?
    • C
      Christine OrtizAug 25, 2025
      If the chain on your Poulan Pro Chainsaw moves at idle speed, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the clutch may require repair by an authorized service dealer.
  • L
    Lauren TylerAug 30, 2025
    Why Poulan Pro 545137224 Chainsaw engine will not accelerate?
    • J
      jacob17Aug 30, 2025
      If your Poulan Pro Chainsaw engine won't accelerate, lacks power, or dies under a load, consider the following: 1. Clean or replace the air filter. 2. Clean or replace the spark plug and regap it. 3. Ensure the chain brake is disengaged. 4. If these steps don't resolve the issue, the carburetor may require adjustment by an authorized service dealer.
  • Q
    qthompsonSep 5, 2025
    Why does my Poulan Pro 545137224 Chainsaw smoke so much?
    • R
      Richard LeeSep 5, 2025
      If your Poulan Pro Chainsaw engine smokes excessively, it's likely due to too much oil in the fuel mixture. Empty the fuel tank and refill it with the correct fuel mixture.

Poulan Pro 545137224 Specifications

General IconGeneral
Engine Type2-cycle
Engine Displacement50 cc
Bar Length18 inches
Power Output2.2 HP
Weight10.8 lbs
Chain Pitch0.325 inches
Chain Gauge0.050 inch

Related product manuals