EasyManua.ls Logo

Poulan Pro 545103414 - User Manual

Poulan Pro 545103414
2 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PARAMOUNT PARTS LIST
R
WEED EATER PARTS LIST
R
R
POULAN PARTS LIST
R
Replaces
1
Note: Illustration may differ from actual model due to design changes
PARTS LIST NO.
PAGE NO.
CHAIN SAW MODEL(s)
545103414
P4018
DATE
7/03/08
PARTS LIST
545103414 --- 6/06/08
r
1. 530057893 Knob--Choke
2. 530057908 Spring--Ign. Switch
3. 530057891 Lever--Ign. Switch
4. 530016080 Screw
5. 530071888 Kit--Trigger/Lockout
6. 530069216 Kit--Fuel Line (Large)
7. 530069247 Kit--Fuel Line (Small)
8. 530095649 Assy--Fuel Pick Up
9. 530023877 Fitting--Fuel line
10. 530071945 Kit--Clutch Washer
11. 530057905 Assy--Clutch Drum 3/8”
12. 530071945 Kit--Clutch Washer
13. 530057907 Assy--Clutch
14. 530016419 Washer--Large Clutch
15. 530047192 Assy--Fuel Cap w/ret
16. 530016064 Screw
17. 530015922 Nut--”U” type speed
18. 530057937 Assy--Flywheel
19. 530057911 Shield--Heat
20. 530015127 Washer--Flywheel
21. 530016134 Nut--Flywheel
All repairs, adjustments and maintenance
not described in the Operator’s Manual
must be performed by qualified service
personnel.
W ARNING
Ref. Part No.
Description
Ref. Part No. Description Ref. Part No.
Description
44
45
22. 530015920 Screw
23. 530057890 Pulley--Starter
24. 530042095 Spring--Starter
25. 530058810 Housing--Fan
26. 530056402 Handle--Starter
27. 530069232 Kit--Rope
28. 530016432 Screw
29. 530016080 Screw
30. 530058786 Assy--Oil Vent
31. 530057236 Assy--Oil Cap w/ret.
32. 530057897 Handguard
33. 530016416 Spring--Handguard
34. 530058870 Assy--Chassis
(Incl. 5,6,7,8,9,15,16,
17,19,31,33,37)
35. 530071893 Kit--Chainbrake
36. 530016432 Screw
37. 530016133 Bolt--Bar
38. 530057910 Plate--Bar
39. 530015917 Nut--Bar
40. 530058933 Assy--Clutch Cover
(Incl. # 41)
41. 530069611 Kit--Bar Adjust
(Incl. 42,43)
42. 530015826 Pin--Bar Adjust
43. 530038593 Retainer--Bar Adjust
44. 952051338 Accy--18” Chain
45. 952044418 Accy--18” Bar
46. 530071945 Kit--Clutch Washer
(Incl. 10,12)
47. 530016432 Screw
48. 530057888 Handle--Front
49. 530071891 Kit--Oil Pump
(Incl. 51,52,53)
50. 530057924 Assy--Oil Pick Up
51. 530016064 Screw
52. 530057931 Assy--Oil Pump
53. 530037820 Gear--Worm
= NEW PART NUMBER FOR THIS IPLn
=
REFER TO THE SERVICE REFERENCE INDICATED FOR MORE INFORMATION. (LOCATED AT END OF IPL)
K
5 15
16
19
11
10
12
13
14
18
20
21
22
23
24
25
17
40
48
47
49
38
37
34
31
30
28
32
35
36
33
27
26
51
52
50
53
42
43
41
2
3
4
1
8
6
9
39
29
Clutch
Washer
Kit
46
7

Questions and Answers

  • W
    wallsnormaAug 11, 2025
    What to do if my Poulan Pro 545103414 Chainsaw engine will not start?
    • E
      Emily White MDAug 11, 2025
      If your Poulan Pro Chainsaw engine won't start or dies quickly, here's what to check: * Ensure the ignition switch is set to ON. * Refill the fuel tank with the correct fuel mixture. * Install a new spark plug. * Check the fuel filter for dirt and replace if needed. Also, inspect the fuel line for kinks or splits, and repair or replace it as necessary. * If the engine is flooded, refer to the “Difficult Starting” section in the Operation Section.
  • N
    Natasha JohnsonAug 18, 2025
    How to fix Poulan Pro Chainsaw that will not idle properly?
    • N
      Nicholas CummingsAug 18, 2025
      If your Poulan Pro Chainsaw engine won't idle properly, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the carburetor may require adjustment by an authorized service dealer.
  • K
    Kimberly GriffithAug 23, 2025
    What to do if the chain moves at idle speed on my Poulan Pro Chainsaw?
    • M
      Molly NicholsAug 23, 2025
      If the chain on your Poulan Pro Chainsaw moves at idle speed, you should first check the idle speed, referring to the “Carburetor Adjustment” section in the Service and Adjustments Section. If the problem persists, the clutch may require repair by an authorized service dealer.
  • J
    johnperryAug 30, 2025
    Why Poulan Pro 545103414 engine will not accelerate?
    • A
      Ashley FernandezAug 30, 2025
      If your Poulan Pro Chainsaw engine won't accelerate, lacks power, or dies under a load, consider the following: 1. Clean or replace the air filter. 2. Clean or replace the spark plug and regap it. 3. Ensure the chain brake is disengaged. 4. If these steps don't resolve the issue, the carburetor may require adjustment by an authorized service dealer.
  • J
    Joshua RodriguezSep 5, 2025
    Why does my Poulan Pro 545103414 Chainsaw smoke so much?
    • K
      Kyle ReedSep 5, 2025
      If your Poulan Pro Chainsaw engine smokes excessively, it's likely due to too much oil in the fuel mixture. Empty the fuel tank and refill it with the correct fuel mixture.

Poulan Pro 545103414 Specifications

General IconGeneral
BrandPoulan Pro
Model545103414
CategoryChainsaw
LanguageEnglish

Related product manuals