To Next PageTo Next Page
Need help?Do you have a question about the Poulan Pro PBV200 LE and is the answer not in the manual?
General| Power Source | Gasoline |
|---|---|
| Engine Type | 2-Cycle |
| Engine Displacement | 25 cc |
| Air Speed | 200 mph |
| Warranty | 2 Years |
| Type | Handheld Blower |
Provides the brand name, model number, and contact information for Poulan PRO.
Key warnings about not returning the unit to the retailer and the importance of reading the manual.
Highlights general unit danger and specific warnings about a hot muffler.
Covers symbols for thrown objects, required personal protective equipment (PPE), and hazard zone.
Addresses risks associated with loose clothing and the importance of disconnecting the spark plug.
Emphasizes understanding the unit and performing pre-start inspections.
Details the specific applications for using the unit as a blower or vacuum.
Covers protective gear, appropriate attire, and planning for safe operation.
Provides guidelines for safely mixing, pouring, and storing fuel.
Details safety measures for fueling and initiating the engine.
Covers safe operating locations, avoiding hazards, and managing blown debris.
Outlines essential safety practices for maintenance and unit storage.
Addresses specific health notices regarding vibration and emission control regulations.
Step-by-step guide for attaching the blower and vacuum tubes.
Instructions for correctly attaching the vacuum bag assembly.
Guidance on how to switch the unit from vacuum use to blower use.
Instructions for properly adjusting the shoulder strap for carrying the unit.
Explanation of the functions and operation of the throttle, primer, and choke levers.
Demonstrates the correct operating position and provides general tips for usage.
Offers advice on efficient use, water conservation, and safety during operation.
Details the correct and safe procedures for fueling the engine.
Outlines the safe positioning and precautions required before starting the engine.
Step-by-step instructions for starting the engine in various temperature conditions.
Covers routine checks for fasteners, parts, and cleaning the unit after use.
Details the procedures for cleaning the air filter and replacing the fuel filter.
Covers checking muffler screws, carburetor adjustments, and storage instructions.
Discusses the impact of gasohol fuels and the use of fuel stabilizers.
Provides steps for engine preparation before storage and a troubleshooting guide.
Outlines the terms, duration, and limitations of the product's limited warranty.
Details the specific warranty coverage for the emission control system.
Explains how to file a warranty claim and where to obtain service.
States the engine's certification levels for emissions compliance.
