Poulan Pro PR271 - Page 33

33
REPAIR PARTS SNOW THROWER - MODEL PR271 (96192009102)
DRIVE
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
1 521 99 11-01 NUT HEX FLANGE LK 1/2-13
2 587 70 34-02 SWING PLATE FRICTION PULL
3 581 12 30-01 ROD TIP PLATE
4 581 73 27-01 SPACER DRIVE
5 532 19 38-85 LATCH SPRING
6 812 00 00-07 E-RING RETAINER
7 581 32 84-01 FRICTION DISC COMBO PULLEY
8 587 19 34-03 BRACKET YOKE ASSEMBLY
9 581 31 53-01 SPRING TORSION DRIVE
10 585 26 38-01 EXTENSION SPRING
11 585 69 15-01 NUT HEX FLANGE LOCK 5/16-18
12 580 75 62-01 BEARING 9/16 I.D. 1622-2RSNR
13 580 75 61-02 RETAINING RING 1622-2RSNR
14 580 75 13-01 WASHER FLAT .59 I.D. X 1.065 X 25 GA
15 580 75 66-01 PAWL ASM RH
16 580 75 60-01 GEAR ASM PLANETARY
17 580 75 63-01 WASHER FLAT .6875 I.D. X 1.00 X 21 GA
18 532 17 53-44 TRUNNION BEARING ASM
19 581 09 09-01 HUB RUBBER WHEEL
20 872 11 05-06 BOLT CARRIAGE 5/16-18 X .75
21 581 09 10-02 PLATE RUBBER WHEEL
22 581 09 11-01 RING RUBBER WHEEL
23 586 64 43-01 E-RING
24 580 75 51-01 ROD PAWL
25 812 00 00-22 E-RING
26 580 75 24-01 SHAFT REDUCTION PWR STR
27 532 75 11-53 NUT HEX FLANGE LK 5/16-18
28 580 75 67-01 PAWL ASM LH