EasyManua.ls Logo

Poulan Pro PR300 User Manual

Poulan Pro PR300
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER'S MANUAL
MODEL NUMBER:
PR300
SNOW THROWER
Always Wear Eye Protection During Operation
IMPORTANT MANUAL Do Not Throw Away
WARNING:
Read the Owner's Manual and
fol low all Warnings and Safety
In struc tions. Fail ure to do so
can result in serious injury.
582 29 05-01
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine.
The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty.

Table of Contents

Questions and Answers:

Poulan Pro PR300 Specifications

General IconGeneral
Clearing Width30 inches
ChassisSteel
Drive TypeFriction Disc
Engine Type4-Cycle OHV
Throw DistanceUp to 50 feet
TypeGas-powered
Engine Displacement208cc
Drive SystemFriction disc
Start TypeElectric / Recoil
Starter TypeElectric/Recoil

Summary

Owner's Manual

Safe Operation Practices

Key safety guidelines for operating the snow thrower and preventing injury.

Training and Preparation

Familiarization with controls, safety, and pre-operation steps for the snow thrower.

Safety Rules

Comprehensive safety precautions and warnings to prevent accidents and ensure safe use.

Product Specs and Responsibilities

Technical details and owner's maintenance duties for the snow thrower.

Operation Guide

Detailed instructions for starting, using, and stopping the snow thrower.

Maintenance and Adjustments

Procedures for routine upkeep, repairs, and adjustments of the snow thrower.

Storage and Troubleshooting

Off-season storage instructions and solutions for common snow thrower problems.

Repair Parts

Auger Housing & Impeller Assembly

Exploded view and part list for auger housing and impeller components.

Control Panel & Discharge Chute

Diagrams and parts list for the control panel, discharge chute, and related cables.

Handles and Drive System

Parts for handles, drive system, pulleys, and shafts.

Chassis, Engine & Pulleys

Diagrams of chassis, engine mounting, and pulley assemblies with part numbers.

Wheels, Bag of Parts & Decals

Parts for wheels, bag of parts, and identification decals for the snow thrower.

Engine, LCT

Related product manuals