What to do if my Poulan Pro Chainsaw motor runs but the chain won't cut?
If the motor operates and the chain rotates but does not cut, it could be due to the following reasons: * The chain is not sharp and needs sharpening. * The chain is installed in the wrong direction. If so, reverse the chain's direction.
Why is the red LED on and LED 2 flashing green on my Poulan Pro Chainsaw charger?
This indicates that the internal battery temperature is either too low or too high for charging. Move the battery charger and battery pack to a location where the internal temperature of the battery pack is between 5°C (41°F) and 45°C (113°F).
What to do if my Poulan Pro PRCS16i Chainsaw motor runs but the chain does not rotate?
If the chainsaw motor is running but the chain isn't rotating, it might be because the chain tension is too tight. Also, examine the guide bar and chain assembly for any issues or damage.
General| Brand | Poulan Pro |
|---|---|
| Model | PRCS16i |
| Category | Chainsaw |
| Language | English |
To Next Page
