Please take a moment to register your new product.
You will be required to enter the serial numbers for the Trolley,
Battery and Charger. These are located on the individual items.
The serial number on the underside of the middle tube. See
image for reference.
*Terms and conditions apply. See powakaddy.com for details.
Scan to open the registration page
or visit: powakaddy.com/my-powakaddy
Don’t miss out!
Register now!
Plug ‘n’ Play Battery
2
IMPORTANT- you must fully charge your battery before using
your trolley. Always recharge your battery within 24 hrs of use.
Failure to do so could reduce the life of your battery. See Section
6 Battery Care, for detailed instructions.
Turn the battery on via the button located on the underside of
the battery. The LED light will illuminate green to indicate the
battery is switched on.
Your PowaKaddy trolley features an innovative Plug’n’Play™
battery system including sprung terminals and a locking feature
to maintain power connection over uneven terrain. Once your
battery is charged and trolley assembled, connect your battery as
shown.
1. Engage the front of the battery.
2. Press the front until the battery clips into position.
To remove the battery, depress the front latch and lift the front
of the battery out.
Note: The Lithium battery can be stored within the tray for
transportation. Please ensure you turn o the battery using
the power button on the underside of the battery. Leaving your
battery switched on could lead to your battery discharging or
trolley activating during transportation.
Thank you for purchasing the all new PowaKaddy. Please read the
following instructions carefully. Battery care is very important,
please refer to Sections 2 & 6 for detailed instructions.
When you receive your new PowaKaddy you will have the
following:
Product Warranty
1
1 x Trolley
1 x Battery
1 x Charger
2 x Wheels
1 x Instruction pack
BATTERY
ON
To Next Page
Loading...
Need help?
General
