2
INTRODUCTION
Amplifier provide high-performance sound reinforcement for you mobile audio equipment.
It’s versatility enables compatibility with optional Equalizers, Frequency Dividing Network
Crossovers, and other audio processors in a customized system. The Multi-Mode bridging
capabilities allow flexibility in hosting several different speaker configurations.
To achieve optimum performance, it is highly recommended that you read this Owners
Manual defore beginning installation.
FEATURES
• FULL MOSFET POWER SUPPLY
• PWM CIRCUITRY
• FULL SELECTABLE CROSSOVER HI/FULL/LOW
• THREE WAY PROTECTION CIRCUIT
• 2 ohm STABLE STEREO
• TRI-MODE CAPABLE
• VARIABLE LOW PASS (30Hz~500Hz)
• VARIABLE HI PASS (50Hz~500Hz)
• VARIABLE 24dB BASS EQ
• VARIABLE SUBSONIC FILITER 30HZ- 175Hz
• FREQUENCY RESPONSE: 10Hz TO 30kHz
• S/N RATIO 98dB
• THD 0.02%
• SYSTEM DISTRESS INDICATOR
• 4 GUAGE POWER / GROUND CONNECTION
• DIAMOND CUT HEAT SINK
• GOLD PLATED RCA CONNECTORS
• LINE OUTPUT
• BLUE LIGHT SYSTEM
• TOP PANEL CONTROLS
WARNING
High powered audio systems in a vehicle are capable of generating “Live Concert” high
levels of sound pressure, Continued exposure to excessively high volume sound levels may
cause hearing loss or damage. Also, operation of a moter vehicle while listening to audio
equipment at high volume levels may impair your ability to hear external sounds such as;
horns, warning signals, or emergency vehicles, thus constituting to a potential traffic hazard.
In the interest of safety, Consumer Electronics recommends listening at lower vilume levels
while driving.
To Next Page
Loading...
