Need help?Do you have a question about the Power Acoustik Razor RZ4-1200D and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Power Output (RMS) | 1200W |
| Peak Power | 2400W |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| Crossover Mode | Low Pass |
| Low Pass Crossover Frequency | 50Hz - 250Hz |
| Bass Boost | 0-12dB |
| Bass Boost Frequency | 45 Hz |
| Fuse Rating | 30A x 2 |
| RMS Power at 1 Ohm | 1200 Watts |
| Frequency Response | 10Hz |
| Input Sensitivity | 0.2V - 6V |
| Input Voltage | 14.4V |
Comprehensive list of features for RZ4 series amplifiers.
Comprehensive list of features for the RZ5-2500D amplifier.
Comprehensive list of features for RZ1 series amplifiers.
Power output specifications for RZ4 models.
Power output specifications for RZ5 and RZ1 models.
Guidance on connecting ground, remote, and 12V power wires.
Instructions for using high-level speaker wire inputs.
Details on remote level, crossover, subsonic, LED, sensitivity, and gain controls.
Explains RCA/High Level inputs, Bass Boost, and crossover selection.
Visual guide to controls for 4-channel amplifiers.
Visual guide to controls for the 5-channel amplifier.
Visual guide to controls for mono block amplifiers.
Guidance on choosing a mounting location and general safety warnings.
How to properly set amplifier gain levels for optimal performance.
Explanation of the variable bass boost feature and its frequency response.
Solutions for common symptoms like no sound, no power, or protection mode.
Details on warranty periods based on installation type and coverage.
To Next Page
