Need help?Do you have a question about the Power Acoustik RAZOR RZR1-2500D and is the answer not in the manual?
General| Class | D |
|---|---|
| Max Power Output | 2500W |
| Signal-to-Noise Ratio | >95dB |
| Number of Channels | 1 |
| THD at RMS Output | <0.5% |
| Input Sensitivity | 200mV - 6V |
| Crossover Type | Low-Pass |
| Subsonic Filter | 10Hz - 50Hz |
| Bass Boost Frequency | 45Hz |
| Bass Boost | 0dB - 18dB |
| RMS Power at 1 Ohm | 1250W x 1 |
Lists key features of the RZR1-2500D amplifier, including its class, design, power supply, and protection.
Details technical specifications such as power output at different impedances, max power rating, filter ranges, and dimensions.
Guidance on making proper GND, REM, and 12V power connections for the amplifier, emphasizing safety and correct wiring.
Explains how to connect the amplifier using either Hi-Level or RCA inputs, advising against using both simultaneously.
Illustrates various methods for wiring subwoofers to the amplifier, including single 4-ohm, parallel 2-ohm, and series-parallel 4-ohm setups.
Details the amplifier's pre-amp controls and features, including remote level control, low pass, subsonic, bass boost, and indicator LEDs.
Provides instructions on how to correctly set the amplifier's gain to match the source unit's output voltage and avoid distortion.
Explains the function and adjustment range of the 45Hz variable Bass Boost control, up to 18dB.
Offers guidance on choosing an optimal mounting location for the amplifier, ensuring proper ventilation and avoiding hazards.
Highlights crucial safety warnings, including the necessity of an in-line fuse and safe wire routing practices.
Provides a table with common symptoms, checks, and remedies for issues like no sound, amp not switching on, or protection mode.
Outlines the limited 90-day and one-year consumer warranty terms, including coverage, exclusions, and claim procedures.
To Next Page