Need help?Do you have a question about the Power Acoustik Razor RZ4-2000D and is the answer not in the manual?
General| Power Output (RMS) | 2000W |
|---|---|
| Power Output (Peak) | 4000W |
| Frequency Response | 10 Hz - 20 kHz |
| Input Sensitivity | 200 mV - 6 V |
| Channels | 1 |
| Minimum Impedance Unbridged | 2 Ohms |
| Damping Factor | > 200 |
| Crossover Frequency High Pass | 50 Hz - 250 Hz |
| Crossover Frequency Low Pass | 50 Hz - 250 Hz |
| Bass Boost | 0-12dB |
| Bass Boost Frequency | 45 Hz |
| Fuse Rating | 120A |
| Signal-to-Noise Ratio | > 100 dB |
| RMS Power @ 4 Ohms Bridged | 2000 Watts |
| Signal to Noise Ratio | > 100 dB |
| Input Voltage | 12V |
Highlights key features of RZ4-1200D, RZ4-2000D, and RZ4-3000D models.
Details key features of the RZ5-2500D amplifier model.
Instructions for proper 12V, GND, and REM connections for amplifier operation.
Guide for connecting speaker outputs when RCA outputs are unavailable.
Connects remote control and explains level sensitivity settings.
Covers low pass, subsonic, and variable high pass crossover settings.
Details Bass Boost control and RCA/High Level input usage.
Explains Power/Protection LEDs and crossover selection.
Diagrams illustrating connections for 4-channel models.
Diagram illustrating connections for the 5-channel model.
Diagrams illustrating connections for mono block models.
Guide on correctly setting amplifier input sensitivity for optimal performance.
Explanation of the variable Bass Boost control for monoblock amplifiers.
Details warranty for units installed by non-authorized retailers.
Details warranty for units installed by authorized retailers.
Fields for recording product model, serial number, and purchase details.
Form for submitting owner and vehicle details for product registration.
To Next Page
