Need help?Do you have a question about the Power Acoustik Demon D1-2000D and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Peak Power | 4000W |
| THD at RMS Output | < 0.1% |
| Fuse Rating | 200A |
| Phase Shift | 0° - 180° |
| RMS Power @ 2 Ohms | 1000W |
| RMS Power @ 1 Ohm | 2000W |
| Bass Boost | 0dB - 18dB |
Describes the amplifier's electronic crossovers, including continuously-variable low pass and fixed high pass options.
Explains the amplifier's protection mechanisms, LED indicators, and reset procedures for overload or thermal conditions.
Details the amplifier's ability to operate at 2 Ohms, including increased output, current draw, and gain control usage advice.
Guidelines for connecting low-level (RCA) inputs for optimal audio performance, recommending high-quality cables.
Instructions on connecting and using the dashboard-mounted remote subwoofer level control for adjusting low frequencies.
Information on the purpose of fuses and the importance of using identical replacement fuses to prevent damage or fire.
Steps for marking, drilling, and securely mounting the amplifier, including a note about checking for hidden vehicle components.
Instructions for bridging two specific amplifier models, covering input connections for master and slave units.
To Next Page