Need help?Do you have a question about the Power Dynamics BT10SET and is the answer not in the manual?
General| Bluetooth | Yes |
|---|---|
| Connectivity technology | Wireless |
| Amplifier class | D |
| Product color | White |
| Recommended usage | Home |
| Cables included | AC |
| Quantity per pack | 2 pc(s) |
| Speaker type | 2-way |
| Tweeter diameter | 50.8 mm |
| Number of drivers | 2 |
| Speaker placement | In-wall/in-ceiling |
| Audio output channels | - channels |
| Mid-range driver diameter | 127 mm |
| Number of tweeter drivers | 1 |
| Tweeter diameter (imperial) | 2 \ |
| Mid-range driver diameter (imperial) | 5 \ |
| Impedance | 8 Ω |
| Sensitivity | 88 dB |
| Frequency range | 90 - 20000 Hz |
| RMS rated power | 60 W |
| AC input voltage | 100-240 V |
| DC input voltage | 15 V |
| AC input frequency | 50 - 60 Hz |
| AC adapter output current | 0.4 A |
Weight and Dimensions| Width | - mm |
|---|---|
| Weight | - g |
Avoid electrical shock and fire risks by proper handling, avoiding liquids, heat sources, and damaged components.
Keep unit away from children, humidity, and strong magnetic fields; do not force controls or use chemicals.
Ensure repairs by qualified technicians, use original parts, and operate within specified temperature ranges.
Carefully unpack the product, verify all parts are present, and retain original packaging for potential returns.
Connect the unit to a protected circuit using the supplied adapter, ensuring correct mains voltage.
Enable Bluetooth on your device, search for 'POWER DYNAMICS BT10', and connect using password '1234'.
Details output power, speaker sizes, impedance, frequency response, and sound pressure level (SPL).
Includes IP rating, mounting dimensions, power supply, consumption, unit size, and weight.
Lists conformity to EU directives (LVD, EMC, RoHS) and CE certification.
Drill a hole of sufficient size based on technical specifications for speaker mounting.
Connect speaker wires to the correct positive and negative terminals on the amplifier module.
Insert the speaker into the hole and screw it down firmly using the provided screws.
To Next Page