Power Dynamics PDC-35 - Play;Pause Button; Cue Button; Time Button; CD Player Function

1. READ INSTRUCTIONS-All the safety and operating instructions should be read before the product
is operated.
2. RETAIN INSTRUCTIONS-The safety and operating instructions should be retained for future
referenced.
3. HEED WRNING-All warnings on the appliance and in the operating instructions should be
adhered.
4. FOLLOW INSTRUCTIONS-All operating and use instructions should be followed.
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CD player Function:
1. EJECT BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: Disc holder will not open unless stop or pause button has been pushed first.
2. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
3. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
4. CD/USB BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
5. TIME BUTTON
Used this button to choose the time mode: Elapsed time, remaining time or total remaining time.
6. REPEAT BUTTON
Us Use this button to repeat one track or all the track of the CD
7. RELOOP BUTTON
This button is used to start the last saved loop. To finish the loop, press the reloop button.