8. IN BUTTON
This button sets the beginning of the loop. The Loop indicator on the display flashes.
9. OUT BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
10. CONT. / SINGLE BUTTON
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected mode
is indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit reads all tracks and stops.
11. PROG AND FOLDER CONERSION BUTTON
In STOP mode, you can program several tracks (20 tracks max):
Press the STOP button to enter in the stop mode
Press the PROG button to enter in the program mode
Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
Repeat the operation to select all the track you want to listen
Press the play/pause button to start the playback
12. +10 BUTTON
Use this button to jump of 10 tracks in one press.
13. SKIP I<< BUTTON
Use this switch to restart the track or to select the last track.
14. SKIP >>I BUTTON
Use this button to select the next track.
15. FOLDER BUTTON
Allows you to navigate through folders similarly in either USB or CD mode.
16. BUTTON
For selecting random play.With the function activated, the LCD will light up.
17. PITCH BEND-BUTTON
The pitch will drop while the 一 button is pressed and return to the original pitch when it is
released.
18. PITCH BEND+BUTTON
The pitch will automatically rise when the+button is pressed and return to the original pitch when
it is released.
19. USB PORT
Support USB playing and you may also connect the computer with the USB cable but only when
enter into USB work mode.
20. DISPLAY
21. DISC-TRAY
To enter the disc, please refer to the explanations under 6.2 CD-tray.
To Next Page
Loading...
