Basic communications settings (baud rate, protocol) and metering settings
(volts mode, CT/PT ratios) must be configured before you can use the 7330
ION. If these settings have not been configured, follow the steps in the 7330
ION Installation & Basic Setup Instructions before consulting this User’s Guide.
You may only need to read certain sections of this User’s Guide, depending on
how you will use the 7330 ION.
♦
9RHIVWXERHMRKXLI&EWMGWSJXLI-32
Chapter 1 introduces the 7330 ION, and shows how it fits into power monitoring
systems. The display and analysis software tools that compliment the 7330 ION
are discussed, and some of the device’s capabilities are presented.
♦
%GGIWWMRK(EXEERH-RXIVTVIXMRK(MWTPE]W
Chapter 2 shows you how to access the data that the factory-configured 7330 ION
provides. Go directly to this chapter if you want to start viewing real-time data
without performing any additional configuration. Chapter 2 describes what data
you can access using PEGASYS Vista software, PowerView software, and the
front panel display.
♦ 1EOMRK1MRSV'SRJMKYVEXMSR'LERKIW
Chapter 3 describes how to use PEGASYS ION Designer to make minor changes
to the meter’s operation. Configuration functions provided by PowerView and
the front panel are also described.
♦ 'YWXSQM^MRKXLI-329WMRK%HZERGIH*YRGXMSRW
Chapter 4 provides more details about the 7330 ION’s operating software so that
the advanced user can create custom functions by linking ION modules. Chapter
4 also describes advanced communications and I/O functions available with the
7330 ION. Creating custom front panel displays is also discussed.
♦ 8IGLRMGEP7TIGMJMGEXMSRW
The Technical Reference in Chapter 5 provides technical specifications, accuracy
data, ordering options, and warranty/registration information.
♦ 6IZIRYI1IXIVMRK
Details specific to the revenue-class 7330 ION -RMANSI and –RMICAN are
provided in the Appendix.
'LETXIV
'LETXIV
'LETXIV
'LETXIV
'LETXIV
%TTIRHM\%
To Next Page
Loading...
Need help?
General
